No Image AvailableJaguar X-Type Bosch 5.7 ESP / ABS Pump Issues

Has your Jaguar X-Type been suffering from juddering brakes? Is the steering light on? Unfortunately it has been known for Jaguar X-Type Bosch 5.7 ABS pumps to commonly fail. When the vehicle has ‘Traction Control’ there are normally processes in place within the ABS pump for the ESP (Electronic Stability Program), however some vehicles also have an extra ESP module which communicates with the ABS pump. The ABS pump is also referred to as an ABS module, ABS unit, ABS ECU, ESP Module, ESP Controller etc.

Common Jaguar X-Type Bosch 5.7 ABS Problems
Below are a list of just some of the issues that customers have reported with Jaguar X-Type ABS pumps:

  • No Communication via OBD
  • Pressure Sensor Faults
  • Traction Light On
  • ABS Light On
  • Brakes Juddering
  • Handbrake Light On
  • Wheel Speed Sensor Faults
  • Steering Light On
  • Speedo Not Working

No Image AvailableMy Jaguar X-Type Bosch 5.7 ABS / ESP Pump is faulty – How can Sinspeed help me?
If you have identified a problem with your Jaguar X-Type Bosch 5.7 ABS Module and require either a repair or a replacement, Sinspeed can help you. We can Test + Repair your you Jaguar X-Type ABS Unit and remanufacture it using genuine OEM Components that meet and exceed OE Specifications to ensure it is of the highest quality. It will be fully programmed as well as Plug+ Play so that you can fit it back to your vehicle with no issues, and will also come with LIFETIME warranty!

A professional diagnosis and fitting service is also available if required.

We have compiled an extensive list of the most common part numbers that we have found relating to Jaguar X-Type Bosch 5.7 ABS Modules below. If you require any further assistance, please do not hesitate to call us on No Image Available0203 815 9441 where we will be happy to help!

8 thoughts on “Jaguar X-Type Bosch 5.7 ABS / ESP Pump Module Faults – Testing & Repairs”

  1. hi could you tell me do i have to remove the complete pump (requires complete brake system bleed) or can i just remove the module and could you give me an estimate of cost and turn aroud thanks Steve

    1. Hi Steve

      Thanks for the enquiry,

      It is possible to remove just the module if preferred, however in order to run a full bench test we would need the pump + motor as well. I have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

  2. Michael Haveron

    I have a Jag 2.2Diesel X Type, I believe it is the Bosch 5.7 ABS Module I require. I sent this away to a local garage, bit it came back non repairable ao I ninned unit. I have since got one in good condition, how much to recon thos? Can you give me a price for one of your repaired units you have in stock?

    1. Hi Michael

      Thanks for the enquiry,

      We have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

  3. Hi I have a jag x type 2.5awd and I think the ABS pump / Module needs refurbed the numbers on my unit are
    0265 225 131
    5X43 2C 405P
    could you give me a price please

    1. Hi Mark

      Thanks for the enquiry,

      We have sent you an email with full information and pricing. If you have any questions, please reply to the email and we’ll be happy to assist you.

      Kind Regards

      Jason
      SINSPEED

  4. Hi
    My Jaguar X type 2.0 diesel has a fault with the traction control and ABS lights coming on. Also last week the speedo and rev counter stopped working but they are working again. I think this could be a related fault.
    I’ve changed the front two wheel sensors but the fault remains. Do you think my ABS pump/module is at fault and can this be repaired? How much would that cost and what is your turnaround time please.
    Thanks and regards

    Alan

    1. Hi Alan

      Thanks for the enquiry,

      The faults with the instrument cluster & rev counter dropping off intermittently can definitely be related to a faulty ABS module. We do get quite a few of these units in that tend to be faulty but we won’t know for sure until the unit has been tested.

      I have sent you an email with full information & pricing. If you have any questions, please reply to the email and we’ll be happy to assist you.

      Kind Regards

      Jason
      SINSPEED

Leave a Reply to Jason Cancel reply

Your email address will not be published. Required fields are marked *