Peugeot 207 Teves MK70 ATE ABS ECU Pump FaultsIf you own either a Peugeot 206 or 207, you may have experienced the failure of the infamous Teves MK70 ATE ABS pump, which unfortunately has been known to suffer the same design flaws at the earlier Teves MK60 ATE ABS pump which were known to be complete failures. Both units have internally built pressure sensors with a low maximum pressure rating, and the list below outlines the identical common failures that have been found in both units:

Common Peugeot 206 & 207 Teves MK70 ATE ABS Pump Problems:

  • Brake Pressure Sensor (C1301 or C1302)
  • No Communication Fault
  • ESP / ASR / TCS / DCS (Traction) Light On
  • Wheel Speed Sensor Faults
  • ABS Light On

Note: The above list consists of the most common faults we have found with these units, but is not a complete list of possible faults.

Sinspeed ABS Repair Service
Here at Sinspeed, if we find flaws in the original design, such as the most common failing internal G201 Brake Pressure Sensor Fault, we will not only look to repair the fault, but we will also modify the unit to ensure that the design fault has been permanently rectified to avoid any further issues regarding the same fault. To give our customers that complete peace of mind, we also offer Lifetime Warranty on all repairs!

Thousands of these units have been repaired in our workshop over the years, so to ensure a faster turnaround, we now also carry these units in stock. All of our exchange units are self-calibrating and will not require any programming.

If you have a faulty Teves MK70 ATE ABS / ESP Pump fitted to your Peugeot 206 or 207 and are looking for a repair or replacement of your damaged ABS unit, then give us a call today on 0203 815 9441.

Tags:

50 thoughts on “Peugeot 206 / 207 Teves MK70 (ATE) ABS Pump Repair Service”

  1. colin
    Reply

    i have got peugeot 206 sw 1.4 06 56 8 valve with a ate 10.02070068.4 abs pump.
    we are having faults with 2 rear sensors replaced but still won’t put light out,also red stop flashing abs and hand brake light on. kfw engine and valeo ecu. HELP 079*******.

    1. Jason
      Reply

      Hi Colin,

      Thank you for your enquiry,

      I have sent you an email with pricing and information regarding the repair solution we offer for the MK70 ATE ABS Pump on your Peugeot 206. I have included turnaround times in my email but if you do have any further questions please reply to the email and I’ll be happy to assist you further.

      Kind Regards

      Jason
      SINSPEED

      1. Karen
        Reply

        Hiya, I have a Peugeot 207 same problem with abs and stop sign how much for abs pump? Or repair mine? Its 1.4 petrol kind regards Karen

        1. Jason
          Reply

          Hello Karen

          Thanks for the enquiry,

          We have sent you an email with full information and pricing.

          Kind Regards

          Jason
          SINSPEED

    1. Jason
      Reply

      Hi

      Thanks for the enquiry,

      We can repair the MK70 ATE unit with your part number 🙂 no problem. I’ve sent you an email just now with full pricing and information but if you have any further questions please come back to me in the email and I’ll be happy to assist you.

      Kind Regards

      Jason
      SINSPEED

  5. Martin Hickey
    Reply

    Hi Jason

    I wanted to know if you ship these units to Australia.
    I have a 207 CC 2007 model
    Peugeot told me I need part number 4541Z3.
    Last 6 numbers on the vin number are 34044973
    What would a unit cost shipped here.
    I look forward to your response

    Regards

    Martin

    1. Jason
      Reply

      Hi Martin

      Thanks for the enquiry,

      This is a real hot seller for us and I can see currently we’re out of stock but we are always getting them in. We can however offer a rebuild of your existing unit if you cannot wait for a replacement unit to become available. We have sent you an email with full pricing and information.

      Kind Regards

      Jason
      SINSPEED

  7. Heather
    Reply

    Hi my 2008 206 has the abs modulator problem how much am i looking at for having it repaired? We cant find a second hand part with the same part number

    1. Jason
      Reply

      Hi Heather

      Thanks for the enquiry,

      We’ve sent you an email with pricing and information.

      Kind Regards

      Jason
      SINSPEED

  9. Alex
    Reply

    Hello,

    I have a peugeot 207 m play year 2007. the SRS light is on and my garage can’t look into it and recommended me to seek help from an aBS expert. I saw your article but i obviously cannot tell if that is the problem with my car. Where are you based? Could you give me a quote if I take my car to you? How much do you charge?
    Thank you.
    Alex

    1. Jason
      Reply

      Hi Alex

      Thanks for the enquiry and many apologies for the delay in getting back to you.

      We can repair your unit and we’ve sent you an email just now with full pricing and information but if you have any further questions please come back to us in the email and we’ll be happy to assist you.

      Kind Regards

      Jason
      SINSPEED

  11. Steve
    Reply

    Hi I’m enquiring on the cost of a repair for a no communication fault for a Peugeot 207 ABS ECU ate MK70 CEM 00
    10.0970-1126.3
    Many Thanks

    1. Jason
      Reply

      Hi Steve

      Thanks for the enquiry and many apologies for the delay in our response.

      We have just sent over an email now with full pricing and information regarding the repair of your Peugeot ABS Pump.

      Kind Regards

      Jason
      SINSPEED

  13. Russ
    Reply

    Got a 10.0207-0036.4 abs pump in our 206 and just failed the mot due to a persistent abs fault light on the dash. Will your repair service sort this out and if so can you give me a quote please. It looks easy enough to remove/replace but can you also tell me if there Is any particular bleeding process on replacement please.
    Many thanks
    Russ

    1. Jason
      Reply

      Hi Russ

      Thanks for the enquiry,

      We have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

      1. Russ Hutchison
        Reply

        Jason Can you resend your e-mail pleae as i didn’t receive it. E-mail address is all lower case. Russ

        1. Jason
          Reply

          Hi Russ

          Thanks for coming back to me,

          I have resent this but if you’re still not receiving it then please give our sales team a call on 0203 815 9441 as there may be a spam filter blocking our email.

          Kind Regards

          Jason
          SINSPEED

    1. Jason
      Reply

      Hello Leon

      Thanks for the enquiry,

      We’ve sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

  17. Lee Power
    Reply

    Peugeot 206 with Teves mk 70 ABS unit 10.0207-0002.4 / 9641871180. Got the following intermittent fault read by Peugeot Planet ” Recirculation pump. Pump locked, CO, CC-or CC+ ” & ABS warning light is on. Can I have price for service / exchange unit please?

    1. Jason
      Reply

      Hi Lee

      Thanks for the enquiry,

      This won’t be the pressure sensor fault but it is one we can generally test for and repair. I have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

  19. Paul
    Reply

    Hi , i have a Peugeot 207cc 2008 with a abs pump 9663945780, the fault i have is that the brake pedal sinks to the floor when engine starts,there are no faults stored or lights on, would the valves in the block be faulty and bypassing, I have changed master cylinder and there are no leaks so abs pump valves are the only option left

    1. Jason
      Reply

      Hi Paul

      Thanks for the enquiry,

      The fault you are describing can be caused by the ABS pump and we can help rectify this fault. I have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

Leave a Reply

Your email address will not be published. Required fields are marked *